MLX90640, 2.8-inch LCD digital infrared thermal imaging, DIY handheld multi-functional thermal imager, temperature detection, detection tool

Dear Friends，Check stock first by email to us ： [email protected]

We know very well that We have cooperated no more than once.

 good service can attract customers to place orders for a long time. 

So every time we try our best to serve the needs of our customers.

Trust us once, 

Help each other establish a long-term cooperation path.

Product packaging weight: 150g

Product packaging size: 12*9*3.2cm

Packaging method: carton

Packing list:

1* Thermal imager

1* Glasses cleaning cloth

1*USB Type-C

This is a handheld multi-functional thermal imager, which is small in size and light in weight.

With a 2.8" TFT display, the data is clear at a glance.

It can be used in a variety of occasions and is an indispensable tool for family and industrial use.

Features:

- Measuring range -40°C to +300°C, 8Hz dynamic refresh rate

- 2.8" screen resolution is 320*240; the screen can display and track the highest temperature, minimum temperature and center point temperature.

- The shell is made of FR4 epoxy sheet to better protect internal components and have a long service life.

- Small size, easy to carry

- Lithium-ion battery power supply. USB-C charging; up to 4 hours of battery life. It can be used while charging.

- Built-in SPI Flash chip, which can store 100 pictures. View and copy image files through a data cable to a computer or mobile phone.

- Integrated design, no need for external equipment

Specifications:

- Material: Epoxy resin board + printed circuit board

- Infrared sensor: MLX90640ESF-BAB

- Hardware resolution: 32*24-pixel far-infrared array

- Screen resolution: 320*240 pixels

- Temperature measurement range: -40°C to 300°C,

- Measurement accuracy: ±2°C,

- Operating temperature: 0 to 50°C,

- Operating humidity: ≤70% - Refresh rate: 8Hz

- Field of view: horizontal 55° x vertical 35°

- Emission rate: 0.95

- Charging specification: USB Type-C5V/1A

- Product size: 85*55*30mm

- Battery: 3.7V 800mAh lithium-ion battery

-Working hours: ≥4 hours

Application:

- High-precision non-contact temperature measurement

- Security and intrusion detection

- Temperature detection

- Intelligent building environmental temperature measurement and control

- Car air conditioning control

- Microwave oven and oven temperature detection and control

- Temperature monitoring of industrial parts

- Visual temperature sensor

- Side leakage and maintenance of floor heating equipment

- Thermal detection of circuit boards and components

This device adopts an integrated design and can work without external equipment.

The screen display parameters are shown in the figure below.

Take photos: In the power-on state, press the photo/reset key to save the current image.

View or copy images: After connecting to the computer with a USB-C data cable,

press the mode switch key to switch to the USB flash drive mode to read or copy the image.

Reset:

The body can store 99 images.

When the storage is full, press and hold the photo/reset key to release it when the screen flashes.

The device will be reset and can be restored to the initial state after about 15 seconds.

Caution:

This device is powered by a 3.7v lithium battery.

It is recommended to keep the battery level at about 50% before not in use for a long time.