ST-LINK V2, STM8/STM32 Emulator, Programmer, Downloader, Debugger, 3.3V 5V Universal

Shipping List:

1, ST LINK V2 1 (anti-static bag sealed packaging)

2. 4pcs 20CM debugging DuPont wires (sealed and packaged in anti-static bags) 

with random color

STM32 Downloader ST-Link V2 Emulator STM8 Programmer Auto Upgrade 3.3V 5V Universal

Mini ST-LINK/V2, functioning exactly as officially,

Supports automatic upgrade,

supports full range of STM32 SWD and full range of STM8

Download and debug of SWIM.

Eight highlights of our ST-LINK V2:

1. Use aluminum alloy U disk shell to install the internal motherboard, which is easy to carry, safe and reliable!

2. The interface definition is marked directly on the shell, which is clear at a glance, convenient and practical!

3, 5V and 3.3V are provided to the outside world at the same time, which is convenient for you to connect 5V and 3.3V target boards

4. The shell characters are laser and laser engraved, and they will never fade and fall off! Permanently clear and clear!

5. The internal motherboard comes with a 500MA self-recovering fuse to thoroughly protect your expensive computer motherboard!

6. Red and blue LED indicators, convenient for you to observe the working status of ST-LINK V2 from time to time!

7. Distribute 4 DuPont wires, so that you can easily cope with different target board line sequences!

8. The outer packaging uses anti-static bags, and the automatic sealing machine seals the packaging, which is safe and reliable, and is not afraid of static electricity or water entry!

Features :

1. Support a full range of STM32 SWD interface debugging,

The 4-wire interface is simple (including power supply),

fast and stable;

Interface definition shell directly marked! No need to flip through the instructions!

2. Support a full range of STM8 SWIM download and debugging (commonly used development environments such as IAR, STVD, etc. are supported); The supported software versions are as follows:

① ST-LINK Utility 2.0 and above

② STVD 4.2.1 and above

③ STVP 3.2.3 and above

④ IAR EWARM V6.20 and above

⑤ IAR EWSTM8 V1.30 and above

⑥ KEIL RVMDK V4.21 and above

3. Support automatic firmware upgrade to ensure the follow-up support of ST company's products.

The firmware has been factory upgraded to the latest V2.J17.S4;

4. Increase 5V power output, and the output I/O ports are protected, so you are not afraid of ST-LINK V2 damage caused by operation errors!

5. The interface uses pure copper gold-plated 2.54 pitch simple horn seat, with 20CM DuPont wire, which can cope with different target board line sequences and flexibly wiring;

6. Use U disk aluminum alloy shell to protect the motherboard, which is convenient to carry, not afraid of static electricity, not afraid of falling and bumping.

Included with information package,

the information includes: (electronic file, supports email delivery)

1. STLINK/V2 driver

2. KEIL MDK (4.60) development environment (and other commonly used development environments)

3. IAR STM8 (1401) development environment (and other commonly used development environments)

4. STVD STM8 development environment (and other commonly used development environments)

5. Some classic STM32 materials (including a large number of instance source code and video tutorials)

6. Some classic STM8 materials (including a large number of example source code and learning experience)