NanoVNA H4 vector network analyzer, antenna analyzer

Basic performance of 4-inch NanoVNA-H4 version:

ABS shell: 75mm x 133mm x 18mm (excluding protrusions)

● Measurement frequency: 10KHz ~ 1.5GHz

● Radio frequency output: 0dbm (±2dB, base wave)

● Frequency accuracy: <2ppm

● Frequency stability: <0.5ppm

● Measurement range: 70dB(50kHz-300 MHz),(60dB (300M-900MHz), 40dB (0.9G-1.5GHz)); (When using harmonic measurement, you need to pay attention to the error generated by the nonlinear transformation of the base wave)

● Port SWR: < 1.1

● Display: 3.95" TFT (320 x 480)

● USB interface: USB type-C communication mode: CDC (serial)

● Power supply: USB 5V 220mA, built-in 2000mAh battery, maximum charging current 1A

● Number of calibration points: up to 401 (optional), unlimited when connecting to PC

● Number of scanning points: up to 401 (optional), not limited when connecting to PC

● Scanning point speed: >600 p/s (RBW=4000Hz),

● Display tracking: 4, tag: 8, setting save: 7

Measurement:

S parameter, voltage standing wave ratio, phase, delay, Smith diagram, time domain analysis...;

NanoVNA-H4 4-inch Shipping list:

NanoVNA-H4 host (including 2000mAh battery) X1

USB Type-C data cable X1

25cm USB TypeC-TypeC Data Cable X1

15cm SMA male to male RG316 radio frequency cable X2

A set of SMA calibration parts (O/S/L, default male head), SMA female-to- female connector X1

Touch screen paddle and lanyard X1

Weight: 350g